Rauemi
| Tinana | Konumohe(5050 5052 5056 5154) | (AL Mg 1%-1.5%,2%-2.5%,3%-3.5%,5%) | ||
| Whakaoti | Kua orohia | RAL Tae peita | ||
| Mandrel | Konumohe | Te maitai ● | Kowiri tira | |
| Whakaoti | Kua orohia | Whakakikoruatia konutea ● | Kua orohia | |
| Momo Upoko | Dome, CSK, Flange Nui | |||
Whakatakotoranga
| D1 NOM. | DRILL NO.&RAHI PUKA | TOI.WAEKE | ARANGA KAUPAPA | L (MAX) | D NOM. | K MAX | P MIN. | KUTI LBS | TIKA LBS | ||
| INIHI | MM | INIHI | MM | ||||||||
| 3/32" 2.44mm | #41 2.5-2.6 | 1-AS32 | 0.020-0.125 | 0.5-3.2 | 0.250 | 6.4 | 0.188" 4.8 | 0.032" 0.81 | 1.00" 25.4 | 70 310N | 80 360N |
| 1-AS34 | 0.126-0.250 | 3.2-6.4 | 0.375 | 9.5 | |||||||
| 1-AS36 | 0.252-0.375 | 6.4-9.5 | 0.500 | 12.7 | |||||||
| 1/8" 3.21mm | #30 3.3-3.4 | 1-AS41 | 0.020-0.062 | 0.5-1.6 | 0.212 | 5.4 | 0.250" 6.4 | 0.040" 1.02 | 1.06" 27 | 120 630N | 150 670N |
| 1-AS42 | 0.063-0.125 | 1.6-3.2 | 0.275 | 7.0 | |||||||
| 1-AS43 | 0.126-0.187 | 3.2-4.8 | 0.337 | 8.6 | |||||||
| 1-AS44 | 0.188-0.250 | 4.8-6.4 | 0.400 | 10.2 | |||||||
| 1-AS45 | 0.252-0.312 | 6.4-7.9 | 0.462 | 11.7 | |||||||
| 1-AS46 | 0.313-0.375 | 7.9-9.5 | 0.525 | 13.3 | |||||||
| 1-AS48 | 0.376-0.500 | 9.5-12.7 | 0.650 | 16.5 | |||||||
| 1-AS410 | 0.502-0.625 | 12.7-15.9 | 0.755 | 19.7 | |||||||
| 5/32" 4.0mm | #20 4.2-4.2 | 1-AS52 | 0.020-0.125 | 0.5-3.2 | 0.300 | 7.6 | 0.312" 7.9 | 0.050" 1.27 | 1.06" 27 | 190 850N | 230 1020N |
| 1-AS53 | 0.126-0.187 | 3.2-4.8 | 0.362 | 9.2 | |||||||
| 1-AS54 | 0.188-0.250 | 4.8-6.4 | 0.425 | 10.8 | |||||||
| 1-AS56 | 0.252-0.375 | 6.4-9.5 | 0.550 | 14.0 | |||||||
| 1-AS58 | 0.376-0.500 | 9.5-12.7 | 0.675 | 17.1 | |||||||
| 1-AS510 | 0.502-0.625 | 12.7-15.9 | 0.800 | 20.3 | |||||||
| 1-AS516 | 0.876-1.000 | 22.2-25.4 | 1.175 | 29.8 | |||||||
| 3/16" 4.8mm | #11 4.9-5.0 | 1-AS62 | 0.020-0.125 | 0.5-3.2 | 0.325 | 8.3 | 0.375" 9.5 | 0.060" 1.52 | 1.06" 27 | 260 1160N | 320 1430N |
| 1-AS63 | 0.126-0.187 | 3.2-4.8 | 0.387 | 9.8 | |||||||
| 1-AS64 | 0.188-0.250 | 4.8-6.4 | 0.450 | 11.4 | |||||||
| 1-AS66 | 0.252-0.375 | 6.4-9.5 | 0.575 | 14.6 | |||||||
| 1-AS68 | 0.376-0.500 | 9.5-12.7 | 0.700 | 17.8 | |||||||
| 1-AS610 | 0.502-0.625 | 12.7-15.9 | 0.825 | 21.0 | |||||||
| 1-AS612 | 0.626-0.750 | 15.9-19.1 | 0.950 | 24.1 | |||||||
| 1-AS614 | 0.752-0.875 | 19.2-22.2 | 1.075 | 27.3 | |||||||
| 1-AS616 | 0.876-1.000 | 22.2-25.4 | 1.200 | 30.5 | |||||||
| 1-AS618 | 1.002-1.125 | 25.4-29.6 | 1.325 | 33.7 | |||||||
| 1-AS622 | 1.252-1.375 | 31.8-34-.9 | 1.575 | 40.0 | |||||||
| 1/4" 6.4mm | F 6.5-6.6 | 1-AS82 | 0.020-0.125 | 0.5-3.2 | 0.375 | 9.5 | 0.500" 12.7 | 0.080" 2.03 | 1.25" 32 | 460 2050N | 560 2500N |
| 1-AS84 | 0.126-0.250 | 3.2-6.4 | 0.500 | 12.7 | |||||||
| 1-AS86 | 0.252-0.375 | 6.4-9.5 | 0.625 | 15.9 | |||||||
| 1-AS88 | 0.376-0.500 | 9.5-12.7 | 0.750 | 19.1 | |||||||
| 1-AS810 | 0.502-0.625 | 12.7-15.9 | 0.875 | 22.2 | |||||||
| 1-AS812 | 0.626-0.750 | 15.9-19.1 | 1.000 | 25.4 | |||||||
| 1-AS814 | 0.752-0.875 | 19.2-22.2 | 1.125 | 28.6 | |||||||
| 1-AS816 | 0.876-1.000 | 22.2-25.4 | 1.250 | 31.8 | |||||||
| 1-AS818 | 1.001-1.125 | 25.4-28.6 | 1.375 | 34.9 | |||||||
Taupānga
Ko te konupora -aluminum alloy tuwhera momo rivet matapo i hangaia e Handan wodecy co., Ltd he momo hou o te hua hononga whakarewa.Ko nga rivets matapo momo tuwhera he painga o te mahi ngawari, te riveting pai, te ahua ataahua, nga taonga tinana teitei.Ko te whiriwhiri tino pai o te riveting taha kotahi.Ko nga rivets tuwhera mutunga kore anake te ngawari ki te whakamahi, te kaha nui, te iti o te haruru, ka taea te whakaiti i te kaha o te mahi me etahi atu ahuatanga, engari ano hoki nga hononga piri.
Ka taea te wehea nga rivets konumohe ki te rivet upoko dome, rivets countersunk me rivet upoko flange nui.Ko ta matou konumohe tuwhera momo rivet matapo he maha nga whiringa o nga mea penei i te tinana rivet konumohe me te mandrel rino, te tinana rivet konumohe me te tinana konumohe, te tinana rivet konumohe me te mandrel kowiri tira.Na he maha nga whiringa o te konumohe konumohe mg 1.5% 2.5% 3.5% me te 5%.
RAL tae peita rivet, He pai mo te riveting o hono wahi ki te taua tae.He ataahua, he kaha hoki te mata riveting.Ka taea e matou te hanga rivet peita tae i runga i te tono a nga kaihoko, i runga i to tauira, i te nama waehere RAL ranei.
Ko nga rivets matapo konumohe ka taea te whakamahi whanui i roto i nga momo waka, nga oko, te hanga miihini, te hikohiko, te taputapu, te miihini kai, nga taputapu rongoa, te hanga, te whakapaipai me etahi atu waahi whakamau.
Tohutohu mo te hoko rivets matapo:
1. Tīpakohia te rauemi rivets matapo e tika ana: konumohe, maitai, kowiri tira, parahi, etc.
2. A, no te tirotiro i te rivet matapo, ka taea te ine i te rahi e whai ake nei: te diameter o nga rivets, te roa o te rivet mandrel, te matotoru o te upoko rivet me te diameter o te upoko, te roa katoa o te mandrel, te roa o te whakaatu mandrel , te diameter o te mandrel.I roto i te tino tirotiro, ka taea hoki te ine i te kaha totoro me te kaha kutikuti o te hua.
3. Ko te mea nui ko te aro ki te rivet, ahakoa he tino tika te ahuatanga riveting.
